Performance · Wheel, Brake & Suspension Packages
Complete Wheel, Brake & Performance Suspension Packages
Lower your lap times, slash your 60-foot times, and harness high horsepower with precision-matched chassis, braking, and wheel upgrades for track days, HPDEs, and drag racing.
Chassis & Suspension
Precision Chassis & Suspension Setup for Track Days, HPDE & Drag Racing
Getting the absolute most out of your vehicle requires a suspension system tailored to your specific driving discipline. Whether you need dynamic high-speed stability through apexes at High Performance Driver Education (HPDE) track days, sharp turn-in for autocross, or maximum weight transfer down the quarter-mile, Wisco Speed & Performance delivers race-proven chassis tuning.
If you are searching for a premier performance suspension shop or the best suspension setup for drag racing and road courses, our team balances spring rates, dampening, roll stiffness, and geometry for ultimate mechanical grip.
- HPDE & Track Day Handling: Custom coilover systems, sway bar upgrades, adjustable control arms, camber plates, and corner balancing designed to keep your tire contact patch planted through hard cornering.
- Drag Car Suspension Setup: Engineered drag race chassis setup solutions including custom coilovers, anti-roll bars, and travel limiters built to handle violent launches.
- Drag Race Rear Suspension Setup: Specialized 4-link, ladder bar, and torque arm geometry tuned to control instant center, squat, and pinion angle.
- Drag Racing Leaf Spring Setup: CalTracs traction bar setups, split mono-leafs, and solid bushings engineered to eliminate wheel hop.
- Comprehensive Suspension Tuning: From road-course alignment to specialized shock and suspension tuning for drag racing, we provide shop diagnostic setups and drag suspension tuning to adapt to any surface.
Wheels, Brakes & Rear Ends
Forged Wheel Packages, High-Performance Brake Packages & Rear End Setups
Reducing unsprung weight and rotating mass is one of the single most effective ways to improve acceleration, braking performance, and suspension response. Wisco Speed & Performance partners with industry-leading forged wheel manufacturers—including Weld Racing, Forgestar, CCW, and Belak Industries—to supply custom drag packs, beadlocks, flow-formed street/strip wheels, and lightweight track day wheel fitments tailored to your vehicle's clearances and backspacing requirements.
To complement your wheel package, our full-service performance brake shop installs multi-piston big brake kits for road-course heat management alongside ultra-lightweight drag race brake packages that free up horsepower.
Furthermore, we tie your drivetrain together with a bulletproof drag racing rear end setup. Our team provides rear housing reinforcement, custom gear ratio setups, heavy-duty axle upgrades, and precise pinion angle alignment to ensure your vehicle handles aggressive transbrake hits or high-speed track downshifts without flex or distortion.
Why Wisco
Your Go-To Aftermarket Performance & Suspension Tuning Shop
If you have been searching online for reliable automotive performance "shops near me", Wisco Speed & Performance in Rosendale, WI is your premier regional destination. As a specialized suspension tuning shop and performance fabrication facility, we understand how unsprung weight, alignment angles, and brake bias interact under extreme track conditions.
When you need an aftermarket suspension that can seamlessly integrate lightweight wheels, aggressive tires, big brake clearances, and tuned shocks, we are here to help. As one of the Midwest's leading aftermarket suspension shops, we bring professional track and strip expertise to your build. Stop searching for performance suspension near me—partner with a team that measures success in faster lap times, lower ETs, and total driving confidence.
FAQ
Frequently Asked Questions About Wheel, Brake & Suspension Packages
Should I choose lowering springs or adjustable coilovers for my performance car?
Your choice depends on how you use your vehicle and your desired level of adjustability:
- Lowering Springs: Best for street-driven vehicles looking for a fixed 1.0”–1.5” drop, reduced body roll, and a factory-like ride quality at a lower cost.
- Coilovers: Best for track, drag, or spirited street setups. They offer full height adjustability, independent damping (rebound/compression) tuning, and the ability to corner balance the chassis for maximum cornering grip or drag strip weight transfer.
What are beadlock wheels, and do I need them for high-horsepower drag racing?
Beadlock wheels physically clamp the tire bead to the wheel rim using an outer mechanical ring and bolts.
- Why You Need Them: On high-horsepower vehicles (typically 700+ rwhp or cars running sticky drag radials/slicks), extreme launch torque can cause the tire to spin on the wheel rim, ruining balance, tearing valve stems, and losing crucial traction.
- Application: Beadlocks are essential for hard-launching drag racing, drag-and-drive events, and high-torque street/strip builds.
Will a Big Brake Kit (BBK) fit under my stock or aftermarket wheels?
Not always. Upgrading to multi-piston calipers (such as 6-piston Brembo or Wilwood systems) and larger rotors increases caliper overhang and overall radius.
- Wheel Diameter & Barrel Clearance: Larger rotors typically require 18” or larger wheels.
- Spoke Clearance (Offset & X-Factor): Caliper faces stick out farther toward the back of the wheel spokes. We test-fit or verify wheel template dimensions (spoke clearance, offset, and barrel clearance) before ordering to guarantee a clean installation without needing unsafe wheel spacers.
Why is a professional alignment required after installing suspension components?
Any time you change ride height or replace suspension components (coilovers, lowering springs, control arms, or camber plates), factory toe, camber, and caster angles change drastically:
- Tire Wear: Skipping an alignment can ruin a set of expensive performance tires in less than 1,000 miles.
- Handling Safety: Incorrect toe angles cause high-speed instability, aggressive tramlining, and unpredictable handling under braking.
At Wisco Speed & Performance, every wheel, brake, and suspension package is aligned in-house immediately following installation to ensure optimal grip and stability.
What is corner balancing, and how does it improve track performance?
Corner balancing involves placing the car on four individual wheel scales and adjusting coilover perch heights to balance cross-weight distribution (Left Front + Right Rear vs. Right Front + Left Left).
- Handling Consistency: Ensures the car turns in, grips, and brakes identically in both left-hand and right-hand corners.
- Traction Control: Prevents unexpected wheel spin out of apexes caused by uneven tire loading.
How much does it cost to install a complete wheel, brake, and suspension package in Wisconsin?
Turnkey package pricing varies depending on component selection and vehicle platform:
- Lowering Springs & Performance Shocks (Installed & Aligned): $1,500 – $3,000+.
- Adjustable Coilover Package (Installed, Corner-Balanced & Aligned): $2,500 – $5,000+.
- Big Brake Kit (Front & Rear Upgrade Installed + Fluid Flush): $3,000 – $7,500+.
- Drag Wheel & Beadlock Package (Mounting, Balancing & Fitment): $3,000 – $7,000+.
What is the difference between street brake pads and track brake pads?
- Street Pads: Formulated for low noise, low dust, and immediate cold bite at low operating temperatures (ambient to 400°F).
- Track / Race Pads: Formulated with high-friction compounds designed to operate between 600°F and 1,500°F+. They resist thermal brake fade during 20-minute track sessions, but produce increased dust, squeal at low speeds when cold, and wear unheated rotors faster.
What custom wheel offset and fitment options do I need for flush or drag setups?
Achieving a wide, flush stance or fitting a wide drag radial without tire rubbing requires calculating three parameters:
- Wheel Width & Diameter: Sized to fit the targeted tire contact patch.
- Offset (ET) & Backspacing: Sized to clear internal suspension struts/sway bars while keeping the outer tire edge inside the fender lip.
- Fender Clearance & Camber: Dialing in negative camber or rolling fender lips when fitting aggressive track or drag fitments.
Get Started
Ready to Upgrade Your Stance, Handling, and Stopping Power?
Stop leaving performance on the track or the street. Contact Wisco Speed & Performance today to build a custom Wheel, Brake, and Suspension Package optimized for your driving goals.
Call the Shop
(920) 579-0605Visit
177 N Grant St
Rosendale, WI 54974
What Happens Next
We'll call you within one business day to talk through your vehicle, your goals, and an honest estimate. No pressure, no upsell script.